Bosch DISHWASHER REPAIR
Resolving a Bosch dishwasher with standing water in the bottom filter area. Cleaned the drain impeller and installed an optimized high-loop drain line.
*Disclaimer: The final cost depends on the specific appliance brand, model complexity, required parts, and diagnostic results. Actual repair costs may differ from historical averages.
Standing dirty water remains at the bottom of the tub after cycles
Dishwasher shows error code 'E24' or 'E25' during operation
Cycle terminates early with a humming sound
Cloudy dishes and lingering foul odor inside the tub
A small piece of hard plastic was jammed in the drain pump impeller, stalling the motor. Additionally, the lack of a proper 'high loop' on the drain hose allowed sink wastewater to siphon back into the dishwasher.
Shut off power and closed the under-sink hot water supply valve.
Removed the lower kickplate and extracted the dishwasher filter assembly.
Opened the pump impeller cover and cleared the plastic debris causing the jam.
Tested the drain pump motor operation to ensure no electrical damage occurred.
Re-routed the drain hose under the sink to create a proper high loop configuration.
Ran a short rinse cycle to verify complete drainage and high loop function.
Fill out the form below or call 445-444-3058. The $76 diagnostic fee is credited toward the repair.